Checking date: 18/05/2022


Course: 2022/2023

Test of materials and their quality management
(15729)
Bachelor in Industrial Technologies Engineering (Plan: 418 - Estudio: 256)


Coordinating teacher: VAREZ ALVAREZ, ALEJANDRO

Department assigned to the subject: Materials Science and Engineering and Chemical Engineering Department

Type: Electives
ECTS Credits: 6.0 ECTS

Course:
Semester:




Requirements (Subjects that are assumed to be known)
Materials Science and Engineering, Materials Technology
Objectives
- Ability to search the most adequate testing techniques in the field of materials - Ability to understand and differentiate the relevant information from a test/calibration report to take a decision, in the field of Materials Science and Engineering. - Ability to use multi-disciplinary knowledge to deal with a problem. - Ability to work in groups and ditribute the work to deal with complex problems. - Ability to extrapolate quality processes of materials and the standards related to materials to other engineering disciplines.
Skills and learning outcomes
Description of contents: programme
1. Standards and Product Certification 2. National Accreditation Body 3. Testing Laboratories and ISO 17025 accreditation. 4. Chemical Testing: Wet and dry way. Spectroscopic techniques. 5. Tests on Plastic Materials 6. Tests on Adhesives 7. Metallurgical Testing 8. Ceramic Testing 9. Tests on Powder Metallurgy 10. Tests on Composite Materials 11. Calibration Equipment 12. Estimation of uncertainty in Calibration and in Test
Learning activities and methodology
- Teaching classes. - Class exercises. - Lab practices.
Assessment System
  • % end-of-term-examination 0
  • % of continuous assessment (assigments, laboratory, practicals...) 100
Calendar of Continuous assessment
Basic Bibliography
  • . CGA-ENAC-LEC Rev. 10 Marzo 2021. Criterios Generales para la acreditación de Laboratorios de Ensayo y Calibración según Norma UNE-EN-ISO/IEC 17025 (Octubre 2014. ENAC. Entidad Nacional de Acreditación. 2021
  • . CGA-ENAC-LEC Rev. 6 Octubre 2014. Criterios Generales para la acreditación de Laboratorios de Ensayo y Calibración según Norma UNE-EN-ISO/IEC 17025 (Octubre 2014. ENAC. Entidad Nacional de Acreditación. 2014
  • . Guide to the expression of Uncertainty in Measurement. Guia GUM . BIPM-Bureau International des Poids et Mesures. 2008
  • . Norma UNE-EN ISO/IEC 17025:2005.- Evaluación de la conformidad. Requisitos generales para la competencia de los laboratorios de ensayo y de calibración.. AENOR. 2005
  • . UNE-EN ISO/IEC 17025:2017.- Evaluación de la conformidad. Requisitos generales para la competencia de los laboratorios de ensayo y de calibración.. AENOR. 2017
  • Douglas A. Skoog, F. James Holler, Timothy A. Nieman. PRINCIPIOS DE ANALISIS INSTRUMENTAL. MC GRAW HILL INTERAMERICANA. 2000
  • Jordi Riu, Ricard Boqué, Alicia Maroto, F. Xavier Rius . ¿Determinación de la trazabilidad en medidas físicas¿ . Técnicas de Laboratorio . 2000
  • María Rosa Gómez Antón. Ensayos en materiales polímeros. Plásticos y cauchos. Universidad Nacional de Educación a Distancia. 2009
  • S L R Ellison y A Williams . Trazabilidad Metrológica en la Medición Química Una guía para lograr resultados comparables en medición química . Guía EURACHEM / CITAC . 2020
  • Vicente Alvarez García. La Normalización Industrial. Tirant lo Blanch, Universitat de Valencia. 1999
Additional Bibliography
  • CEM. PROCEDIMIENTO TH- 003 PARA LA CALIBRACIÓN POR COMPARACIÓN DE TERMOPARES. CEM-Centro Nacional de Metrologia.
  • CEM. PROCEDIMIENTO ME-005 PARA LA CALIBRACIÓN DE BALANZAS MONOPLATO. CEM-Centro Español de Metrología.
  • J. Goldstein, D. E. Newbury, D.C. Joy, C.E. Lyman, P. Echlin, E. Lifshin, L.C. Sawyer, J.R. Michael . Scanning Electron Microscopy and X-ray Microanalysis. Plenum US. 2003

The course syllabus may change due academic events or other reasons.